John Guest push-fit elbow fitting for the Guzzle H2O Stealth Series inlet. Fits all Stealth systems. Use this elbow fitting to save space on your Stealth installation by routing the inlet hose at 90 degrees. Reduces the width required for inlet plumbing.
Guzzle H2O Stealth Inlet Elbow Fitting
Save Space on Your Stealth Inlet Install
- Free Shipping -- Ships free to your door, no minimum
$7.95
Out of stock
In the box
- Elbow / Swivel Inlet Fitting
Save Space on Your Stealth Inlet Install
When you're building a grid-independent water system in a tight van or cabin install, every inch of plumbing space matters. This John Guest push-fit elbow fitting routes your Guzzle H2O Stealth Series inlet hose at a full 90 degrees, cutting down the width your inlet plumbing demands. It's a field-tested, built-to-survive component that fits all Stealth systems — a straightforward way to make your off-grid water setup work in confined spaces without compromising reliability.
FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
90° Elbow Routing
Push-Fit Connection
Fits All Stealth Systems
Space-Saving Design
90°
Hose Routing Angle
All
Stealth Systems Covered
1
Push-Fit Elbow Fitting
No More Guesswork With Random Fittings
When you're cramming a water filtration system into a Revel or Storyteller van build, plumbing space disappears fast. Buying random fittings from a marketplace listing and hoping they thread correctly wastes time and risks leaks. Off Grid Vault carries only components pre-vetted for the systems we sell — this John Guest elbow is specified by Guzzle H2O for the Stealth Series inlet. No guesswork, no incompatible threads, no returns. Push it in, route your hose at 90 degrees, and reclaim the available your tight install demands.
Tool-Free Push-Fit Reliability
John Guest push-fit technology means no tools, no thread seal tape, and no guessing if the connection seated correctly. The fitting locks onto standard tubing with a simple push — and releases with a press of the collar when you need to reconfigure. In an off-grid water system where you might need to winterize, service filters, or rerun lines, that matters. This elbow holds pressure reliably without constant re-tightening, which is exactly what you need in a mobile or remote installation where a loose fitting isn't just inconvenient — it's a water loss you can't afford.
Reclaim Inches in Tight Van Builds
Van and cabin builders know the reality: you measure your plumbing run three times, and it still barely fits. This elbow eliminates that problem at the inlet by redirecting the hose perpendicular to the unit, cutting the horizontal available your Stealth system needs. It's field-tested in Revel and Storyteller Overland van conversions — two of the most space-constrained builds in the off-grid vehicle world. If it fits there, it fits your setup. For a seven-dollar part that solves a space problem you'd otherwise solve with a more expensive system redesign, this is the kind of practical addition that separates a clean install from a frustrating one.
Compatibility
Verify your setup matches these conditions before ordering.
- Compatible with all Guzzle H2O Stealth Series water systems
- Uses John Guest push-fit connection type
- Installation requires reduced inlet plumbing width
Where This Fitting Works
Built for tight installs where straight-run inlet plumbing won't fit.
Revel & Storyteller Van Builds
Cabin Water Systems
Confined-Space Plumbing Runs
Full specifications
At a glance
- Dimensions
- See product page
- Surface
- See product page
- Warranty
- See product page
Full specifications7 data points across 4 categories
Dimensions
| Length | See product page |
|---|---|
| Width | See product page |
| Height | See product page |
Power & Performance
| Type | John Guest push-fit elbow fitting |
|---|---|
| Routing Angle | 90° |
Materials
| Material | See product page |
|---|
Compliance & Warranty
| Warranty | See product page |
|---|
The Off Grid Vault Promise
Every component we carry is vetted for real-world performance.
Free ShippingShips free to your door — no minimums, no thresholds, no fine print.
30-Day Performance GuaranteeIf it doesn't perform as specified, return it uninstalled in original packaging within 30 days.
Expert SupportOur team knows off-grid water systems. Reach out before you buy if you need fitment guidance.
★★★★★
“Saved my Revel build. I was about three inches short on available for the Stealth inlet run and this elbow gave me exactly the room I needed. Push-fit connection held through two months of rough forest service roads without a single drip. Wish I'd ordered it with the system instead of figuring out I needed it after the fact.”
Frequently Asked Questions
This elbow is specifically designed for the Guzzle H2O Stealth Series inlet. It may not be compatible with non-Stealth Guzzle H2O systems, which use different inlet configurations. If you're unsure which system you have, contact us with your model details and we'll confirm the correct fitting before you order. We'd rather get it right than have you return a part that doesn't fit.
Generic hardware store elbows use standard NPT threads that may not match the John Guest push-fit specification on your Stealth inlet. Mismatched fittings create leak points in a system that's supposed to deliver clean drinking water. This elbow is the exact fitting Guzzle H2O specifies for the Stealth Series — not a close approximation. At Off Grid Vault, we only stock what the manufacturer recommends, so you install with confidence.
No tools required. John Guest push-fit fittings connect by simply pushing the tubing into the fitting until it seats. To disconnect, press the collar in against the fitting and pull the tubing out. This is one of the advantages of the push-fit system — no thread seal tape, no wrenches, no over-tightening that can crack plastic fittings in a mobile installation.
Yes. This elbow is used specifically for installation on most Revel and Storyteller Overland van conversions where the Stealth Series is mounted. These van builds have extremely tight plumbing clearances, and the 90-degree routing is what makes the Stealth system fit without modifications. If you're building out either of these platforms, this is the fitting you need.
If the fitting leaks after installation, first verify that the tubing is fully seated — push it in firmly until it stops. John Guest fittings are reliable when properly seated. If it still leaks, contact us within our 30-day performance guarantee window. As an authorized dealer, we stand behind what we sell and will replace a defective fitting promptly.
The 90-degree bend introduces minimal flow restriction in a typical van or cabin water system. For the flow rates the Stealth Series is designed to handle, the difference between a straight fitting and this elbow is negligible in real-world use. You're not sacrificing meaningful water pressure for the space savings — the tradeoff heavily favors using this elbow in tight installs.
The Off Grid Vault Promise
Every component we carry is vetted for real-world performance.
Free Shipping
Ships free to your door — no minimums, no thresholds, no fine print.
30-Day Performance Guarantee
If it doesn't perform as specified, return it uninstalled in original packaging within 30 days.
Expert Support
Our team knows off-grid water systems. Reach out before you buy if you need fitment guidance.
Related products
-
Electric Dirt Bikes, Solar Panels
Price range: $2,193.95 through $2,676.95 Get notified This product has multiple variants. The options may be chosen on the product page
About guzzle h2o Solar Panels
guzzle h2o is a trusted manufacturer of premium solar panels. OffGridVault is an authorized dealer offering the full guzzle h2o lineup with free delivery, price match guarantee, and expert support.
View all guzzle h2o products →
Reviews
There are no reviews yet.