enphase|SKU:Q-12-17-240

Enphase Q-12-17-240 Two-Wire Landscape Drop Cable

Simplified Wiring for Your Off-Grid Microinverter Array

50% lighter design — Reduces rooftop handling fatigue
Two-wire architecture — No neutral or ground needed
Plug-and-play connectors — Cuts installation time significantly
Link connectors included — Eliminates cable waste on site
Landscape 60-cell specific — Matched to your module pitch
  • Free Shipping -- Ships free to your door, no minimum
  • FREE System Design Consultation -- We confirm the right Q-Cable variant for your array
  • Compatibility Guarantee -- Pre-vetted to work within the Enphase IQ System

$20.95

0 in stock

Add to Cart
Enphase Q-12-17-240 Landscape Cable
Enphase Q-12-17-240 Landscape Cable
$20.95

30-day money back · No restocking fee

🔒 100% Secure Checkout

Visa Mastercard American Express Apple Pay Google Pay Klarna Link by Stripe
Free Returns 30-day hassle-free returns.
Free Delivery Every order, every time.
Ships in 3–5 Days Heavy-duty crating included.
4.9/5 Stars 2,400+ verified reviews.

In the box

  • Enphase Q-12-17-240 landscape drop cable
Enphase Q-12-17-240 Landscape Cable
Enphase Q-12-17-240 Two-Wire Landscape Drop Cable
$20.95

Simplified Wiring for Your Off-Grid Microinverter Array

The Enphase Q-12-17-240 is a solar-rated, two-wire drop cable purpose-built for landscape-oriented 60-cell modules in your off-grid IQ microinverter system. At 50% lighter than previous Enphase cable generations with no neutral or ground wire required, this field-tested cable cuts install time and eliminates cable waste through smart link connectors. Plug-and-play connectors keep your array wiring clean, organized, and built-to-survive season after season.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
50% Lighter Design
Two-Wire, No Ground
Plug-and-Play Connectors
Zero Cable Waste
240V
System Voltage
78.7"
Connector Pitch
1.7m
Module Pitch
No Guesswork in Your Cable Run

No Guesswork in Your Cable Run

When you pull cable across a roof, the last thing you need is a connector that does not seat right or a wire gauge that does not match your IQ microinverter. Unlike generic marketplace listings where you cross your fingers and hope the specs align, every component at Off Grid Vault is pre-vetted to work within the architecture it is designed for. This Q-12-17-240 drop cable is built specifically for landscape-oriented 60-cell modules in the sixth-generation Enphase IQ System. We would run this cable on our own cabin installs because we know it fits the pitch, the connector, and the two-wire protocol without modification. No neutral, no ground, no adapters, no wasted trips to the hardware store.

Faster Installs With Less Weight

Faster Installs With Less Weight

At fifty percent lighter than previous Enphase cable generations, the Q-12-17-240 reduces the physical burden of routing drops across a solar array. The two-wire architecture eliminates the neutral and ground conductors entirely, which means less copper to manage, fewer connections to torque, and a cleaner wire path from module to aggregator. Plug-and-play connectors snap into place without crimping or stripping, and link connectors let you chain drops to the exact length your array requires without cutting and wasting leftover cable. For an off-grid proven installation where you are handling every detail yourself, lighter cable and simpler connections translate directly to faster completion and fewer mistakes on the roof.

Purpose-Built for Your Module Layout

Purpose-Built for Your Module Layout

The Q-12-17-240 is not a universal cable pretending to fit every configuration. It is engineered for a single, specific use case: landscape-oriented 60-cell modules with a 1.7m pitch and a 2.0m connector spacing. That specificity matters because mismatched cable pitch leads to strained connectors, loose seating, and premature failure in the field. If your array uses landscape 60-cell panels, this cable matches that geometry exactly. If your layout calls for portrait 60-cell or landscape 72-cell modules, Enphase makes corresponding Q-Cable variants for those configurations. Matching the cable to the module layout is not optional in a grid-independent system where you cannot afford a callback to fix a connector that pulled apart under wind load.

Compatibility Check

Verify these conditions before adding to your build.

  • Landscape-oriented module layout
  • 60-cell panel configuration
  • 240V Enphase IQ microinverter system

Where This Cable Fits

Designed for specific module orientations in IQ Series microinverter arrays.

Rural Homestead Solar Array
Off-Grid Cabin Build
Microinverter Trunk Wiring

Full specifications

At a glance

Power
240 Volt
Warranty
See product page
Full specifications6 data points across 4 categories

Dimensions

Module Pitch1.7m
Connector Pitch2.0m (78.7")

Power & Performance

Voltage240 Volt
ConfigurationTwo-wire (no neutral or ground required)

Materials

ConstructionSee product page

Compliance & Warranty

WarrantySee product page

The Off Grid Vault Promise

Every product we carry is vetted for real-world performance. If it doesn't meet our standards, it doesn't make the cut.

Free ShippingShips free to your door — no minimums, no thresholds, no fine print.
30-Day Performance GuaranteeIf it doesn't perform as specified, return it uninstalled in original packaging within 30 days.
Authorized Dealer SupportWarranty claims go through us directly — not through a faceless ticket queue.

Enphase Landscape Cable (single drop)

Enphase, IQ, Q-Cable, 240 Volt, for 60 cell 1.7m Landscape module pitch. Connector Pitch is 2.0m (78.7″), Q-12-17-240

The Enphase Q Aggregator and Enphase Q Cable are part of the sixth generation Enphase IQ System. These accessories provide simplicity, reliability, and faster installation times.

The Enphase Q Cable offers a new two-wire cable that is 50% lighter than the previous generations of Enphase Cables, and has only two wires, with no neutral or ground required. These drop cables come with plug and play connectors that speed installation times and simplify wire management. New link connectors eliminate cable waste. The Q cable is specific to portrait 60-cell or 72-cell (Q-12-10-240), landscape 60- cell (Q-12-17-240) or landscape 72-cell (Q-12-20-200) modules. These cables are sold in cut-to order lengths, as well as in full box quantities.

Features

Highlights – Two-wire Enphase Q Cable is 50% lighter than the previous generation Enphase cable. New cable numbering and plug and play connectors speed up installation and simplify wire management. Link connectors eliminate cable waste.

 

WARRANTY

Reviews

There are no reviews yet.

Be the first to review “Enphase Q-12-17-240 Two-Wire Landscape Drop Cable”

Your email address will not be published. Required fields are marked *

About enphase cable

enphase is a trusted manufacturer of premium cable. OffGridVault is an authorized dealer offering the full enphase lineup with free delivery, price match guarantee, and expert support.

View all enphase products →

Related Categories

Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.