SOLIX 5-Port Solar Charging Connector (XT-60 Interface）
Connects to Anker SOLIX Solar Panels.
Length: 19.7in
Compatibility: Anker 625 Solar Panel, Anker 531 Solar Panel
Anker SOLIX 410W Rigid Solar Panels
Price range: $666.95 through $3,506.95
16.9kW Pallet - Adani Solar 535W Half-Cut Mono-crystalline Solar Panel (Silver) | Up to 650W with Bifacial Gain | M10-144 | Full Pallet (31) - 16.9kW Total
$6,994.95
Anker SOLIX XT60 5-Port Solar Charging Connector
Consolidate Your Solar Panel Connections
- Free Shipping -- Ships free to your door, no minimum
$35.95
Out of stock
In the box
- 1x Anker SOLIX XT60 5-Port Solar Charging Connector
Consolidate Your Solar Panel Connections
Keep your off-grid solar array running clean with the Anker SOLIX 5-Port Solar Charging Connector. Its XT-60 interface links directly to Anker 625 and 531 Solar Panels, giving you a single, organized connection point for your grid-independent power setup. At 19.7 inches, the cable reaches where you need it without excess slack — a field-tested design that cuts down on cable clutter at your base camp or cabin site. Five ports let you consolidate multiple panel runs into one clean feed.
FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
XT-60 Interface
5-Port Design
Anker SOLIX Compatible
19.7in Cable Length
5
Ports
19.7in
Cable Length
2
Compatible Panel Models
No Guesswork With Your Panel Connections
Buying cables from a generic marketplace means hoping the connector matches your panel output and your power station input. One wrong pin configuration and your solar array sits idle. At Off Grid Vault, every accessory we carry is vetted against the equipment it's designed to serve. This XT60 connector is confirmed for Anker 625 and 531 Solar Panels — no mixing, no guessing, no returns because the plug didn't fit. Your off-grid setup deserves components that actually talk to each other, and that's exactly what you get here.
Clean Multi-Panel Routing
Running multiple solar panels into a single power station means dealing with loose leads, tangled cables, and connection points exposed to the elements. The 5-port design on this connector consolidates your panel inputs into one clean XT-60 output. At 19.7 inches, the cable is long enough to organize your panel-side connections without creating excess slack that catches wind or collects debris. For a field-tested solar setup, neat routing isn't cosmetic — it's how you keep your array running reliably season after season.
Built for Anker SOLIX Arrays
Compatibility isn't a nice-to-have when you're assembling a solar charging system — it's the difference between a working array and a box of parts that don't communicate. This connector uses the XT-60 interface specifically designed for Anker SOLIX power stations and is confirmed to work with the Anker 625 Solar Panel and Anker 531 Solar Panel. When you're building a grid-independent power setup, using the correct connector for your specific panel and station combination eliminates a common failure point that trips up even experienced builders.
Compatibility Check
Confirm this connector works with your solar setup before ordering.
- Your power station features an XT-60 input port
- You use Anker 625 or Anker 531 Solar Panels in your array
- Your setup requires a 19.7in connector reach between panels and power station
Built For
Where this connector earns its place in your kit.
Cabin Solar Arrays
Portable Power Stations
RV Solar Setups
Full specifications
At a glance
- Warranty
- See product page
Full specifications6 data points across 4 categories
Dimensions
| Length | 19.7in |
|---|
Power & Performance
| Interface | XT-60 |
|---|---|
| Ports | 5 |
| Compatibility | Anker 625 Solar Panel, Anker 531 Solar Panel |
Materials
| Construction | See product page |
|---|
Compliance & Warranty
| Warranty | See product page |
|---|
The Off Grid Vault Promise
What you get when you buy from us — no fine print.
Free ShippingShips free to your door — no minimums, no thresholds, no surprise charges at checkout.
30-Day Performance GuaranteeIf it doesn't perform as specified, we make it right — uninstalled returns accepted within 30 days.
Free System Design ConsultationOur engineers size your system for your actual consumption — no guesswork, no incompatible components.
★★★★★
“I was running two Anker 531 panels into my SOLIX station with loose cables everywhere. This connector cleaned up the whole setup — one clean XT-60 run to the station instead of dangling leads. Simple fix, big improvement.”
Frequently Asked Questions
This connector is designed specifically for the XT-60 interface used by Anker SOLIX power stations and is confirmed compatible with the Anker 625 and Anker 531 Solar Panels. If you're running a different panel brand, check whether your panel outputs match the XT-60 connector standard before purchasing. When in doubt, reach out to us with your panel specs and we'll confirm fit.
The 5-port design allows you to consolidate multiple panel connections into a single XT-60 output feeding your Anker SOLIX power station. For specific wiring configurations and maximum panel counts, refer to your power station's input wattage limits. If you're planning a multi-panel array and want to confirm your setup will work within those limits, our team can walk you through it.
When you purchase a solar connector from a generic marketplace listing, there's no one to confirm it actually fits your specific panel and station combination. We vet every accessory against the equipment it's designed to serve. If it doesn't match, we don't stock it. You also get our 30-day performance guarantee and free shipping — and if something doesn't work, you're dealing with a team that understands off-grid systems, not a return ticket queue.
Off Grid Vault offers a 30-day performance guarantee on uninstalled products in original packaging. If you receive this connector and it doesn't match your panel configuration, send it back and we'll process your return promptly. We'd rather you get the right part for your off-grid build than force a wrong connector into your solar array — that's how you end up with idle panels and wasted time.
This listing includes the Anker SOLIX XT60 5-Port Solar Charging Connector — a 19.7-inch cable with XT-60 interface. It does not include the solar panels or power station themselves. If you're assembling a complete solar charging setup and want to make sure every component from panels to connectors to station is accounted for, contact us for a free system design consultation.
The 19.7-inch cable is designed to consolidate panel-side connections close to your solar array before running a single feed to your power station. Whether that's sufficient depends on how your panels are mounted and spaced. For most portable or small fixed arrays using Anker 625 or 531 panels, this length handles the consolidation point without excess slack. If your layout is unusual, share your setup with us and we'll confirm.
The Off Grid Vault Promise
What you get when you buy from us — no fine print.
Free Shipping
Ships free to your door — no minimums, no thresholds, no surprise charges at checkout.
30-Day Performance Guarantee
If it doesn't perform as specified, we make it right — uninstalled returns accepted within 30 days.
Free System Design Consultation
Our engineers size your system for your actual consumption — no guesswork, no incompatible components.
Related products
About anker Power Station Accessories
anker is a trusted manufacturer of premium power station accessories. OffGridVault is an authorized dealer offering the full anker lineup with free delivery, price match guarantee, and expert support.
View all anker products →
Reviews
There are no reviews yet.